40 Liter Diesel

Model Number 40 Liter Diesel
Displacement 2,395 cid (39,240 cc)
Compression Ratio 15:01
Bore & Stroke 5.91 in x 7.28 in (150 mm x 185 mm)
Fuel Type DIESEL
Direction of Rotation Counter-clockwise viewed on flywheel
SAE J1995 rated following PASI Specification with a tolerance of +/-5%. Power and torque values are based on standard assumptions. kWe values are based on standard assumptions for mechanical and electrical losses. Ratings and performance are solely for reference only and subject to site conditions and PSI application and ratings guidelines. The product images shown are for illustration purposes only and may not be an exact representation of the final product. All information is subject to change without notice.
60 Hz (1800 RPM)
Rating Fuel kWe kWm
Standby Diesel 1000 1120
Standby Diesel 1300 1420
  • Cast iron cylinder block with inspection door per cylinder
  • Cast iron cylinder liners, wet type and replaceable valves guides and seats
  • Separate cast iron cylinder heads equipped with 4 valves
  • Hardened steel forged crankshaft with induction hardened journals, crankpins and radius
  • Thermostatically-controlled system with gear coolant pump
  • Lube oil cooled light alloy pistons with high performance piston rings
  • SAE 0 flywheel housing and 18” flywheel
  • Heat shield for exhaust manifold and turbocharger
  • Air filter and compressor pipe made in injection moulding
  • 24V electric starter motor and battery charging alternator
  • Manual oil pump, pre-lubricated to ensure good startability
  • Lube oil purifier with replaceable cartridge
  • Fresh water cooled lube oil cooler
  • In line injection pump with flanged electronic governor
  • Three-level filter integrated electric fuel pump, water separation filter
Length 99.4 2,524
Width 54.6 1,388
Height 68.1 1,730


Go to Top